22
BA491201-en
Pos: 109 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/E/ Überschrift 1.1: E ins tellungen am hydraulis chen Fahrw agen @ 24\mod_1302611581158_ 75.docx @ 994317 @ 2 @ 1
4.5
Setting the Hydraulic Jack
Pos: 110 /Technis che Dok umentation/Hebetechnik/ 49 Rad greifer-Hebebühnen/0001 Rad greifer-Hebeb ühnen A lle/I nhalte/Inhalt: E ins t. am hydr. Fahrwagen ( Bilder) RG-HBZ @ 24\mod_ 1302257252608_ 0.d ocx @ 993783 @ @ 1
Pos: 111 /Technis che Dok umentation/Hebetechnik/ 49 Rad greifer-Hebebühnen/0001 Rad greifer-Hebeb ühnen A lle/I nhalte/Inhalt: E ins t. am hydr. Fahrwagen ( Tex t) RG-HBZ @ 24\mod_ 1302259063767_ 75.docx @ 993823 @ @ 1
Note that the jack must be mounted to the column when making any settings.
A: Setting the Lowering Speed
The lowering valve is located on the right-hand side of the cylinder. To set the lowering speed,
adjust the threaded pin using an Allen key while holding the lock nut firmly with an open-end
wrench. Check for correct setting by carefully lowering the jack.
Threaded Pin
OPEN
INCREASE
Lowering Speed
CLOSE
REDUCE
B: Setting the Responsiveness of the Automatic Lowering Function
The automatic lowering valve is located on the left-hand side of the cylinder. Remove the screw
plug using an Allen key, then insert a flat-tip screwdriver to set the adjusting screw. Soak up
leaking fluid with a rag. Reinstall the screw plug.
Adjusting Screw
OPEN
REDUCE
Responsiveness
CLOSE
INCREASE
Pos: 112 /-----Format- ----/MANUE LLE R UMBRUCH Seitenumbruch @ 0\mod_ 1134403577687_0.docx @ 1277 @ @ 1
A
B
