6
BA082601-en
•
The lift may only be operated by trained personnel over 18 years of age.
•
At initial operation, check the functionality of the safety devices.
•
The control desk must be positioned in such a way that there is an unobstructed view to the
complete working area and the emergency stop can be accessed at all times.
•
All structural parts of the equipment must be visually checked at regular intervals.
•
Supply of suitable illuminating devices is the owner's/operator's responsibility.
•
Do not allow anyone to stay in the danger zone when driving on or off the lift.
•
If the operator is unable to see all parts of the danger zone, a trained second person must
monitor such areas.
•
Center the vehicle on the lift when it is in fully lowered position.
•
After positioning the vehicle on the lift secure it against roll-off.
•
The load rating on the identification plate must not be exceeded.
•
Keep the path of movement free of obstructions.
•
Only use the vehicle manufacturer's recommended lift points.
•
Do not use the lift for transporting persons.
•
After raising the vehicle briefly, stop and check the lift supports for secure contact.
•
Make sure the vehicle doors are closed during raising and lowering cycles.
•
Make sure the parking brake is applied during raising and lowering cycles.
•
Closely watch lift and vehicle during raising and lowering cycles.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Observe the installation instructions for the axle lift.
•
Use both hands when moving the axle lift.
•
The axle lift must be in rest position during raising and lowering cycles.
•
Do not allow anyone to climb on lift or inside raised vehicle.
•
Comply with the applicable accident prevention regulations.
•
Keep lift and vehicle free of tools and parts.
•
Keep the lift and lift area clean.
•
The main switch serves as emergency stop switch. In case of emergency turn it to "0".
•
Protect the lift against unauthorized usage by padlocking the main switch.
•
Protect all parts of the electrical equipment from humidity.
•
Use caution with operating vehicle engines. Danger of poisoning!
•
When removing heavy vehicle components, the centre of gravity can change. In such
circumstances appropriate action must be taken as required.
•
Residual risk: Tripping over runways of surface mounted lifts, tripping over tools.
Pos: 20 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S icherheitsvorschr iften für Servicearbeiten @ 6\mod_ 1174482270640_75.d ocx @ 76850 @ 2 @ 1
1.7
Safety Instructions for Servicing
Pos: 21 / Technische Dokumentation/Papierkorb/Hebetechnik/Inhalt: S icherheitsv orschriften für Servicearbeiten HBZ @ 23\mod_ 1298969580124_75.d ocx @ 981599 @ @ 1
•
Service work must be done by authorized service technicians.
•
Turn off and padlock the main switch before doing any repair, maintenance or setup work.
•
The system must be unpressurized during maintenance work.
•
Work on pulse generators or proximity switches must be done by authorized service
technicians.
•
Work on the electrical equipment must be done by service technicians or qualified electricians.
