MAHA LPS 3000 Operating Instructions Manual Download Page 99

Page: 99 / 115

BA052301-en

Process Profile

1 Call up the menu DATABASE and dthen the

menu point LOAD SIMULATION PROFILE:

→

The database browser appears.

2 Select a profile with the cursor key or the

mouse.

3 Open the profile by double clicking or press

the <ENTER> key.

→

The screen for the profile setting appears

4 Enter the changes. Select the boxes and

enter the desired values.

5 The changes are displayed with <F6

IMPORT>.

6 The changes are stored with <F8 STORE>.

Export Profile

See paragraph "

Identical Functions

", function "

Export"

Import Profile

See paragraph "

Identical Functions

", function "

Import"

10.1.6

Driving Cycle Data

1 Call up the menu DATABASE and then the

menu point DRIVING CYCLE:

→

The database browser appears.

2 Select a dataset with the cursor key or the

mouse.

3 Open the dataset by double clicking or

press the <ENTER> key.

→

The measurement screen appears.

Summary of Contents for LPS 3000




















































































































Search results

Summary of Contents for LPS 3000

Reviews:

MAHA LPS 3000, Operating Instructions Manual, Page: 99 / 115

Search results

Summary of Contents for LPS 3000

Reviews: