MAHA LPS 3000, Operating Instructions Manual, Page: 82 / 115

82
BA052301-en
9.3 Engine Flexibility Test
The engine flexibility can be checked using this menu point. Once the flexibility test has been
called up the vehicle mass and Road Load must be entered as in the driving simulation test.
Enter the start and finish speed of the test. Confirm using the <
 > or <Return> key and then the
test can begin.
1 Position the vehicle on the dyno and fix it.
2 Call up the menu FLEXIBILITY
MEASUREMENT.
→ Following screen appears:
3 Enter the parameter in the boxes using the
digit keys or
if available, load these from the database
with the <F6 DATABASE> key.
4 Use the button<F8 CONTINUE>.
Use the cursor keys <

> and <

> to change between the values. Delete erroneously entered
characters using the <BACKSPACE> key. Delete a complete box with the <DELETE> key.
5 Drive in desired gear and before the start
speed is reached, apply full throttle.
The test stand starts recording the time.
6 The duration of the measurement and the
measurement value are displayed.