MAHA LPS 3000, Operating Instructions Manual, Page: 104 / 115

104
BA052301-en
10.5 Select Dyno Type
Use the menu point SELECT DYNO TYPE to set the dyno type.
1 To change the dyno type, use the menu
point SELECT DYNO TYPE.
→ A selection box opens which shows the
available dyno types.
2 Select the desired dyno type.
→ The dyno type is changed and the
program started anew.
10.6 Units
Use the menu item UNITS to select among
Power in PS, SI, Us or GB units.
1 In order to change the units, use the menu
item UNITS.
→ A selection box opens in which the
available unit models are shown. e.g.:
2 Select the unit model needed.
Variable SI-Units Power in PS US Units Brit. Units
Power kW PS HP BHP
Engine speed R/min R/min rpm rpm
Speed km/h km/h mph mph
Torque Nm Nm lbf.ft lbf.ft
Meas. unit kg kg lb lb
Tractive force kN kN lbf lbf
Temperature °C °C F F
Air pressure hPa hPa hPa hPa
Humidity % % % %