150331_IOM_GS_PE-LMD_BASIKA_rho_gb
7 von 30
As soon as the work has been finished all safety and protective devices need to be
reactivated.
Prior to commissioning the plant again, please observe the advice mentioned under the
headline “Commissioning”.
2.7 Modification and Manufacture of Spare Parts on One’s Own
Authority
Any modifications to the plant require the manufacturer’s approval. Safety is only
guaranteed if genuine spare parts and accessories approved by the manufacturer are
used. If different parts are used the liability may become void.
2.8 Illegal Operating Methods
The perfect performance of the supplied plant is guaranteed only if the plant is used as
intended according to section 1 – General Advice – of the operating manual.
The limit values indicated in the data sheet may not be exceeded at all.
This installation and operating manual does not suspend any general prescriptions which
are not mentioned hereunder!
VDMA = Association of German Engineering and Plant Construction e.V.
3
Transportation
Do not throw the grease separators during transportation!
4.
Description of the Grease Separators
Grease separators consist of a water- and odour-proof container (polyethylene HDPE)
according to EN 1825-1 and DIN 4040-100, either in oval shape, for indoor installation in
rooms protected from frost. Equipped with integrated sludge trap or sludge trap connected
in series, volume 100 x NS in litres. The container lids are water- and odour tight by means
of O-seal ring and clamping rings. Equipped with inlet and outlet pipe connection DN 100
for nominal size NS 2 and 4, DN 150 for nominal size NS 7,5 and 10.