Magus BASIKA rho NS 2, Installation, Operating And Maintenance Instructions, Page: 17 / 30

150331_IOM_GS_PE-LMD_BASIKA_rho_gb 17 von 30
8.3 Default settings for LOGO!
The following default settings can be laid down for LOGO:
Clock settings
You can determine the default settings for time and date, summer/winter time changeover
and synchronisation:
•
In the parameterization operation mode under the "Set" menu item.” (Menu item -
“Clock”)
•
In the programming operation mode under the "Setup" menu item.” (Menu item -
“Clock”)
For time and date see Chapter 8.3.1
Summer/Winter time changeover
The automatic summer/winter time changeover can be activated/deactivated:
•
In the parameterization operation mode under the "Set" menu item.”
•
In the programming operation mode under the "Setup" menu item”.
Activating/deactivating summer/winter time changeover in the programming
operation mode:
1. Switch LOGO! to the programming operation mode.
2. You are now in the main menu and want to pre-select the ’
Setup ’ menu: Keys
▲
or
▼
3. Accept ’Setup’: Key OK
4. Move ’>’ to ’ Clock ’ : Keys ▲ or ▼
5. Accept ’Clock’: Key OK
6. Move ’>’ to ’ S/W Time ’ : Keys ▲
or
▼
7. Move ’S/W Time’: Key OK
LOGO! reveals the following display:
The ongoing setting of the automatic summer/winter time changeover is shown in the
bottom line. In the as-delivered condition this setting is shut down
(’Off’: deactivated).
Activating/deactivating summer/winter time changeover in the parameterization
operation mode:
If wanting to activate/deactivate the summer/winter time changeover in the
parameterization operation mode, then select ’
Set.. ’ in the parameterization menu –
followed by the ’ Clock ’ and ’ S/W Time ’ menus. The summer/winter time changeover can
now be activated / deactivated: