MAGUIRE Weigh Scale Blender, Installation Operation & Maintenance

Page: 139 / 141

M A G U I R E P R O D U C T S , I N C .
139
W E I G H S C A L E B L E N D E R

Decommissioning and Disposal
Decommissioning the unit: Disconnect the unit from the power supply. Disconnect the
compressed air supply. Cut all Electrical cables & Pneumatic Hoses to decommission the
equipment. Disposal: Remove air hoses and inspection glasses and dispose of with plastic
refuse. Remove electric motor dispose of with metal. Remainder of unit dispose of with
metal. Controller: Remove battery and dispose of battery with hazardous waste. Remainder
of controller dispose of with electronic waste. Re-cycle any hazardous
materials/substances in accordance with the Local & National regulations of the End User
e.g. Lithium batteries etc, specific attention should be paid to the European RoHS & WEEE
Directives; remove any ‘sharps’ and dispose of in accordance with Local & National
regulations.
Disclaimers
Production of Faulty Product
Processing conditions and materials vary widely from customer to customer and from
product to product. It is IMPOSSIBLE for us to anticipate ALL processing conditions and
requirements, or to be certain that our equipment will perform properly in all instances.
You, the customer, must observe and verify the performance level of our equipment in your
plant as part of your overall manufacturing process.
You must verify to your own satisfaction that this level of performance meets your
requirements. We CAN NOT be responsible for losses due to product that is blended
incorrectly, even when due to equipment malfunction or design incorrect for your
requirements; and/or for any consequential losses due to our equipment not blending to
your requirements.
We will only be responsible to correct, repair, replace, or accept return for full refund if our
equipment fails to perform as designed, or we have inadvertently misrepresented our
equipment for your application.
Accuracy of this Manual
We make every effort to keep this manual as correct and current as possible. However,
technology and product changes occur more rapidly then the reprinting of this manual.
Generally, modifications made to the design of the blender or to the operation of the
software are not reflected in the manual for 3 to 6 months. We always reserve the right to
make these changes without notice, and we do not guarantee the manual to be entirely
accurate. If you question any information in this manual, or find errors, please let us know
so that we may make the required corrections. We will gladly provide you with updated
manuals.