MAGUIRE Weigh Scale Blender 4088, Installation Operation & Maintenance

Page: 18 / 149

18
Model Selection
Controllers are programmed to control all sizes of Weigh Scale Blenders. The MODEL number
that your unit is set for will be displayed across the status bar of the controller's Home Screen.
All Weigh Scale Blender controllers come from factory pre-configured for the model blender they
are attached to. If a new blender controller is installed on a blender of a different model, the
controller model must be changed to match the blender. There are 9 main model categories,
each with at least one sub model. The exact model of the blender can be found on the red serial
tag attached to the blender frame. When changing the model of the blender controller to match
the blender, use the exact model number as listed on the red serial tag. If the model is unknown
or the tag is missing, please contact Maguire Products Inc.
Blender Model Categories Batch Weight
(Grams) Weigh Bin Dimensions (DxWxH, OD) Load Cell Rating
mm Inches
Micro Blender (all models) 400 127x127x118
5” x 5” x 4.625”
1 @ 3Kg
140 (all models) 1000 238x242x270 5.437
” x 9.5” x 6.687”
1 @ 3Kg
200 (all models) 2000 252x252x178 9.5
” x 9.5” x 7”
2 @ 3 Kg
400 (all models) 4000 292x292x254 11.5
” x 11.5” x 10”
2 @ 10 Kg
900 (all models) 9000 394x394x302 15.5
” x 15.5” x 11.875”
2 @ 10 Kg
1200 (all models) 12000 394x394x378 15.5
” x 15.5” x 14.875”
2 @ 20 Kg
1800 (all models) 18000 394x394x429 15.5
” x 15.5” x 16.875”
2 @ 20 Kg
2400 (all models) 24000 508x540x458 20
” x 21.25” x 18”
2 @ 20 Kg
3000 (all models) 30000 537x537x753 21.125
” x 21.125” x 29.625” 2 @ 20 Kg