Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
97
ULTRA By Maguire
- Ultra Low Energy Dryer
ULTRA-600 Technical Specifications
SCOPE
- Provide up to 600 pounds per hour (272 kg/hr) of dry material to an injection molding or
extrusion platform utilizing energy efficient vacuum drying technology. Drying temperature
up to 350º F (185º C).
POWDER REQUIREMENTS
- Voltage: 480 Vac, 3 Phase, 60 Hz or 400 Vac, 3 Phase, 50 Hz
- FLA: 49 / 54
- Disconnect: 60 amp
- Air: 85 psi / 6 bar
- Heating Element: Primary: 20 Kw, Secondary: 1.25 kW (purge circuit)
-
Blower: 8.5 HP, 350 SCFM @ 40” water
HEATING HOPPER
- Capacity: 420 lbs. (191 kg)
-
Insulated construction, 4” of R-15 insulation
- Large Access Door
- Diffuser cone
- 304 Stainless steel internal wall construction, material contact
VACUUM CHAMBER
- Capacity: 195 lb. (88 kg)
- Rail mounted for ease of removal
-
Insulated construction, 4” of R-7.5 insulation
- Access Hatch, insulated glass with captive air gap insulation
- 304 Stainless steel internal wall construction, material contact
- Unions on most air connections for ease of maintenance
- Load cell based continuous level control
MATERIAL SHUT-OFF / VACUUM VALVE
- Slide gate style material shut-off valve
- Camming slide gate style vacuum shut-off valve
RETENTION HOPPER
- Capacity: 215 lb. (98 kg)
-
Insulated construction, 4” of R-7.5 insulation
- 304 Stainless steel internal wall construction, material contact
- Load cell based continuous level control
General Information
