Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
90
ULTRA By Maguire
- Ultra Low Energy Dryer
Removing Receivers from the configuration
If a receiver needs to be removed from the configuration, it can be removed using this procedure.
On the HOME
screen PRESS:
Pressing the SETUP button prompts for a password.
PRESS:
22222
Enter the password (default password is 22222)
Press
to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
PRESS:
Press the large Receiver button.
The screen will contain any previously assigned devices (Pumps or Receivers).
A device must be turned off or communication must be disconnected to remove the device.
When a device is turned off or
communication to the device is disconnected, the loader or pump icon will show a red X over it. The red X enables the option for the
device to be removed by pressing the device.
PRESS:
To remove the receiver.
A prompt to remove the receiver will be shown.
PRESS:
To return to the Setup screen. When you return to the Setup screen, the
Receivers button will show the Setup symbol indicating that you are still in
the Receiver Assignment mode.
PRESS:
To Exit the Assignment Mode. Setup icon will disappear indicating you
are out of the assignment mode.
PRESS:
To exit the Setup screen.