Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
8
ULTRA By Maguire
- Ultra Low Energy Dryer
Installation
Transport and Setup
Shipment
The ULTRA-600 Dryer is shipped as separate components that require re-assembly.
The 2 main sections that are shipped are:
Retention Hopper and Vacuum Chamber
Assembly Frame (A & B)
–
The retention hopper (A)
and vacuum chamber (B) assembly is identified by the
large metal frame encompassing the recessed
pneumatics cabinet, the electrical cabinet, the
mounted vacuum chamber (B), and the removable
material retention hopper (A). Total assembly weight
is 1681 lb. (762 kg).
Heating Hopper Assembly (C)
–
Located on top of
the vacuum chamber/retention hopper assembly
frame. Weight is 349 lb. (158 kg).
Other smaller components will be included.
Lifting and Moving components of the Dryer
Ensure your lifting equipment is
rated to lifting the weight of the
individual sections of the
ULTRA-600.
Follow forklift safety rules
and regulations whenever
moving portions of the
ULTRA-600
The ULTRA-600 platform is designed for ease of lifting and moving. The retention hopper
and vacuum chamber assembly frame was designed with two steel channels spanning
the depth of the machine to allow for a fork truck to safely and easily lift and position the
machine into place.
