Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
18
ULTRA By Maguire
- Ultra Low Energy Dryer
Home Screen
Overview
Preheat
– Preheat Time Actual and Preheat Time Setpoint.
Touch to adjust.
Advanced Information
- Access to advance information.
Additional information can be accessed by touching the Heating
Hopper, Vacuum Chamber and the Retention Hopper.
Shown with enabled options: Auto
Shutdown, Batch Mode, and
Preheat, ULTRA-600 screen
T1 Actual
- Actual Heating
Hopper inlet air temperature
T1 Setpoint
- Heating Hopper
inlet air temperature Setpoint.
Touch to adjust.
T3 Temp
– Actual Heating
Hopper temperature
Vacuum Time
– Vacuum Time
Actual and Vacuum Time
Setpoint. Touch to adjust.
Vacuum Chamber Weight
Vacuum Chamber Actual and
Maximum Weight
Retention Hopper Weight
Actual and maximum weight
Title Bar
- Located across the top of the screen, the title bar displays Model, ID, I/O status, current operating mode,
date and time, Ethernet and USB status.
Navigation Menu
- Located along the right side of the screen, these buttons allow quick navigation to frequently used
and top-level screens. The middle three buttons are soft buttons that can be changed or removed.
Start / Shutdown (Auto Shutdown shown above) Button
- Main Start Stop Control Button of the Dryer.
Navigation Menu
Home Screen
Pressing the Home Screen button from any other screen will return the
operator to the main Home Screen.
Alarm and
Event
Alarm and Event Log displays a history of alarms and other events with a
date and time stamps and description.
Presets
Interactive screen for material presets (recipes) that enable users to
input, edit, and load material parameters to minimize testing setup time.
Print Center
A menu screen of print related options including Totals, Parameters,
Alarm History, Events, Cycle History, Diagnostics. See page 72.
Setup Login
Password protected access to advanced Dryer and System configuration
information. Also displays firmware/software, IP and MAC address info.
Run Dryer
- See page 19
Clean Out
– See page 61
Manual Operations
- See page 28
Top Level Menu: