Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
11
ULTRA By Maguire
- Ultra Low Energy Dryer
Dryer Assembly
Leveling Feet
If using the leveling feet, make sure
the surface that the ULTRA-600 will
be placed on can support the
weight at all 4 corners.
When adjusting the leveling feet,
keep the frame as close to the floor
as possible. Over extending the
threads below the frame is not
recommended for stability reasons.
Install the Heating Hopper
Following proper forklift safety regulations, carefully lift
up the heating hopper, by positioning the forks
underneath the intermediate retaining ring. Place the
heating hopper on top of the machine frame. Ensure
that the front hatch of the heating hopper faces the
same direction as the front of the machine.
Install the four 1/2-13, 1-
1/4” long, grade 8, hex head
bolts and tighten.
