M A G U I R E P R O D U C T S , I N C .
28
W E I G H S C A L E B L E N D E R
Enable Components and Set Material Types
Press
Display will say:
ENTER PASSWORD
Press
Display will say:
PROGRAM
Press
Display will say:
INSTRUCTION [__]
Press
Display will say:
MATERIAL TYPES Comp 1: OFF
The "1" is the component (device) number.
This is component 1. It will control Hopper 1.
Press
Press CE repeatedly to make selection.
Comp 1: REGRIND
Comp 1: NATURAL
Comp 1: ADDITIVE
Comp 1: OFF
MATERIAL TYPES
Comp 1: OFF
When the selection you want is displayed, move on to NEXT component by doing the following:
Press
Display will say:
Comp 2: OFF
REPEAT sequence for ALL components you use.
The
key will navigate through all components.
The
key will change the TYPE for a component.
Components NOT CONNECTED, or NEVER USED, set to OFF.
When complete:
Press
Display will say:
PROGRAM
Press
Display will say:
WAITING
After EXIT, if display says
NEED NATURAL
then you have specified an ADDITIVE without specifying a
NATURAL. At least one Natural is requires when using Percent-of-Natural mode.
FOUR dispense valve systems use components 1 through 4. TWO dispense valve systems use 1 and 2. SIX
dispense valve systems use 1 through 4, then 7 and 8. Panel front OUTLETS are always components 5 and
6. Additional outlets are generally components 7 and 8.
Summary of Contents for WEIGH SCALE BLENDER WSBMB Series
