Maguire Products WEIGH SCALE BLENDER WSBMB Series, Installation Operation & Maintenance

Page: 22 / 148

M A G U I R E P R O D U C T S , I N C .
22
W E I G H S C A L E B L E N D E R

Model Selection
Controllers are programmed to control all sizes of Weigh Scale Blenders. The MODEL number
that your unit is set for will be displayed across the status bar of the controller's Home Screen.
All Weigh Scale Blender controllers come from factory pre-configured for the model blender they
are attached to. If a new blender controller is installed on a blender of a different model, the
controller model should be changed to match the blender. There are 8 main model categories,
each with at least one sub model. The model of the blender can be found on the red serial tag
attached to the blender frame. The possible models are:
Blender Model Batch Weight (Grams) Weigh Bin Dimensions
(DxWxH)
Load Cell Rating
mm Inches
MB / MB1 / MB2 400 127x127x127
5” x 5” x 5”
1 @ 3Kg
140 / 140R / 140MP 1000 254x153x153 6
” x 10” x 6”
1 @ 3Kg
220 / 240 / 240R / 260 2000 254x254x178 10
” x 10” x 7”
2 @ 3 Kg
420 / 440 / 440R / 460 4000 254x254x254
10” x 10” x 10”
2 @ 10 Kg
940 / 950 / 960 9000 407x407x305 16
” x 16” x 12”
2 @ 10 Kg
1840 / 1860 18000 407x407x432
16” x 16” x 17”
2 @ 20 Kg
2400 24000 560x508x458
22” x 20” x 18”
2 @ 20 Kg
3000 30000 407x407x432
20” x 22” x 30”
2 @ 20 Kg
“R” Models have 2 removable hoppers
WARNING: Changing Model will set all parameters and settings to factory defaults.
Changing the model will reset the controller's blender configuration settings and
parameters to the defaults for the selected model. System configuration and
preferences will be retained through a model change.
Change the model of the blender controller:
Press Display will say: ENTER PASSWORD
Press Display will say:
(displays current model).
SELECT WSB MODEL xxx
MODEL xxx
Press To scroll through all model sizes.
When the model you want is displayed, then:
Press Controller will reset and restart as the system you have
selected.