Maguire Products Vacuum Batch Dryer VBD-150, Installation Operation & Maintenance, Page: 49 / 98

Maguire Products, Inc.
49
VBD

- Vacuum Dryer

TSC
Communications Setup
VBD-150 communications enabled software communication over Ethernet using the MLAN Protocol. For more
information about the MLAN Protocol and the VBD-150 Dryer see the MLAN Protocol manual, available on the
Maguire Products Inc website.
MLAN communications over Ethernet use port 9999 to communicate.
Modbus communications, when enabled (see below), use port 502.
Setting the MLAN ID Number
Press
Display will prompt for a password. (default: 22222) Then press:
Press
Display will show the System Configuration categories.
Press Communications Display will show the System Communications categories.
Press MLAN I.D. Number Display will show the MLAN I.D. Number screen.
On this screen, enter the new ID number using the keypad. Valid
I.D. numbers are 1 though 254.
Press To save the Changes.
Setting the IP Address, Subnet Mask, Gateway
Press
Display will prompt for a password. (default: 22222) Then press:
Press
Display will show the System Configuration categories.
Press Communications Display will show the System Communications categories.
Press TCP/IP Configuration Display will show the TCP/IP Configuration screen. On this
screen, enter the IP Address, Subnet Mask and Default Gateway.
Use the keypad to enter the number into the field highlighted in
green. To advance to the next field, touch the field you want to
edit and type the desired value.
Press To save the Changes.
Enabling Modbus