Magtek kDynamo Air, Installation And Operation Manual

Page: 22 / 34

3 - Operation
kDynamo| Secure Card Multimedia Device for iPad | Installation and Operation Manual
Page 22 of 34 ( D998200284-10 )
3.2 About the General Status LED
kDynamo’s General Status LED , integrated into the pushbutton (see section 1.5 About kDynamo
Components ), provides feedback to the operator and cardholder about the internal state of the device .
Table 3-1 shows how to interpret the flashing patterns of the General Status LED.
Table 3-1 - kDynamo General Status LED Meanings
Color Flashing Pattern Meaning
Off Off
The device is powered off, or the battery is
completely drained and needs to be recharged.
Blue Off / Flash 1 Time
The device is not charging, and its battery is fully
charged. Recharge if desired.
Blue Off / Flash 2 Times
The device is not charging, and its battery is at
medium charge. Recharge soon.
Blue Off / Flash 3 Times
The device is not charging, and its battery is
critically low, and it can not process transactions.
Recharge immediately.
Blue
On / Flash Off 4
Times The device is charging, and its battery is charged
to below 50% capacity.
Blue
On / Flash Off 3
Times The device is charging, and its battery is charged
to between 50% and 70% capacity.
Blue
On / Flash Off 2
Times The device is charging, and its battery is charged
to between 70% and 90% capacity.
Blue On / Flash Off Once
The device is charging, and its battery is charged
to above 90% capacity.
Blue Solid On
There are three conditions where the General
Status LED turns solid on:

The device is in Sleep Mode.

An operator is updating the firmware. After
completion, the device resets and returns to
normal operation.

The operator is holding the pushbutton down.
This provides feedback that the pushbutton is
working correctly.