Install Print Ribbon
Open the printhead by gently pulling
up on the (blue) release tabs.
Insert the printer ribbon by placing
the ribbon spools on the printer hubs.
Note: Match the green hubs to the
spool with the green ring.
Close the printhead by pressing it
CONTENTS
Two (2) Keys
Two (2) Card Weights
50 Blank White Cards
One (1) Printed Sample Card
One (1) Six-Foot Crossover Cable
One (1) AC Power Cable
One (1) Stylus (for monitor)
Thirteen (13) Encoder Cleaning Cards
Thirteen (13) Printer Cleaning Cards
IMPORTANT:
PRIOR TO INSTALLATION, PLEASE CONTACT THE MAGTEK HELP DESK
FOR THE LATEST INFORMATION ON THE EXPRESSCARD 1000.
Remove the beaded shipping
restraint before assembly.
STEP ONE
SETUP
