7 - Notification Messages Sent from Device to Host (Extended Notifications Only)
eDynamo| Secure Card Reader Authenticator | Programmer’s Manual (COMMANDS)
Page 64 of 245 (
D998200115-17
)
7.2.4
Notification 0x0303 - ARQC Message
The device uses this notification to send ARQC data for the host to process. After the host processes the
ARQC data, it should send
Extended Command 0x0303 - Online Processing Result / Acquirer
to inform the device it can proceed with the transaction.
Table 7-3 - Notification Data, ARQC Message
Offset Field Name
Value
0
Message
Length
Two byte binary, most significant byte first. This gives the total length of the
ARQC message that follows, excluding padding and CBC-MAC.
2
ARQC
Message
Property 0x68 – EMV Message Format
and Appendix
. The host is expected to use this data to process a
request.
