Magtek eDynamo, Programmer'S Manual

Page: 224 / 245

Appendix E - EMV Factory Defaults (EMV Only)
eDynamo| Secure Card Reader Authenticator | Programmer’s Manual (COMMANDS)
Page 224 of 245 ( D998200115-17 )
Appendix E EMV Factory Defaults (EMV Only)
E.1 EMV Common Settings
This section lists settings that are common across all EMV databases on the device.
E.1.1 EMV Common Terminal Settings and Defaults
This section lists the default EMV Terminal Settings shared across all terminal databases on the device.
For information about reading and changing these settings, see section
8.5.2 Extended Command
0x0306 - Read Terminal Configuration and section 8.5.1 Extended Command 0x0305 - Modify
Terminal Configuration .
Table 9-8 - EMV Common Terminal Settings
Tag Default Value (Hex)
Max.
Length
Configurable Tag Description
5F2A 08 40 0x02 MagTek Transaction Currency Code
5F36 02 0x01 MagTek Transaction Currency Exponent
9F1A 08 40 0x02 MagTek Terminal Country Code
9F1C
31 31 32 32 33 33 34
34
0x08 MagTek Terminal Identification
9F4E 30 30 30 30 30 30 30 0x28 MagTek Merchant Name and Location
DFDF14 00 00 75 30 0x04 MagTek Socket Timeout for Online Processing (ms)
DFDF15 00 00 00 01 0x04 MagTek
Socket Retries (number of connection
retries in Online Processing)
DFDF19 65 6E 0x02 MagTek
Default Terminal Language (Multi-
Language Only) see
Appendix F
DFDF2D
65 6E 66 72 69 74 64
65 65 73
0x0A Read Only
Supported Terminal Languages (Multi-
Language Only) see
Appendix F
E.1.2 EMV Common Application Settings and Defaults
There are no default EMV Application Settings shared across all application databases on the device.