2 - How to Connect to Devices
DynaFlex, DynaProx| Utility BCR | Manual ( Windows )
Page 12 of 16 (
D100005916-10
)
2.2
How to Connect Using the Serial Connection
1)
For best results, use the cable that is included with the device.
2)
Connect the USB-C end of the cable to the DynaProx device and the other end to the PC. This cable
is for powering the device.
3)
Connect the 6-pin header end of the Serial cable to the DynaProx device and the other end to the PC
Com port. This cable is for communicating with the device as a COM port. A USB to Serial adapter
cable may be used if the PC is not equipped with a COM port.
4)
Launch the DynaFlex/DynaProx Utility BCR and select a
Serial DynaProx
device in the list, then
press the connect button.
5)
The
Log Messages
shows the status of the connection.
6)
To disconnect the device, press the
Disconnect
button.
