Magstripe MSRE206, Programmer'S Manual

Page: 8 / 26

MSRE206 Programmer’s Manual Rev. 2.8
Hongkong Unique Electronic INT'L LTD
www.ylk-ic.com
5
Section
Section Section
Section 5
5 5
5 Utilities
Utilities Utilities
Utilities Test
Test Test
Test Program
Program Program
Program
Every MSRE206 comes with a utilities test program disk that includes a Windows version. This program is to verify
and demonstrate the functionality of the MSRE206. In some cases, it can be used as a card reading and writing
program.
�
� �
�
System System System System Requirement Requirement Requirement Requirement
1. 80286 PC/AT compatibles or later model with color display.
2. Either the following operating systems: Windows 95,98,2000,XP,VISTA
3. 256K available conventional memory.
4. A free serial port (Com 1 or Com 2) with DB9 male connector.
� � � �
Test Test Test Test Program Program Program Program Installation Installation Installation Installation
User shall follow the steps below in order to install test program.
A. Connect MSRE206 to USB port, and power on it.
B. Execute test program from the subdirectory of ‘Demo AP’ (e.g. MSRE206.exe)
D. When the test program is first opened, a password dialog box will ask whether you wish a first time
password.
D The test program will auto-detect communication port. If there is any errors occurred, it’ll appear in the
information dialog box after opening the program. User can close the AP by pressing OK button.
E. If “ Not Not Not Not Find Find Find Find Reader/Writer! Reader/Writer! Reader/Writer! Reader/Writer!” ” ” ” appears in the information dialog box after opening the program, check to
see that the USB connector is plugged into the correct USB port and the power cord/connector is also
attached to USB thus lighting the green LED on the MSRE206.
F. When the test program is opened, you’ll see the main window of the READER/WRITER UTILITY
PROGRAM.
From this main window you can activate all functions by clicking the appropriate buttons and following the
on screen instructions.