Magnum M9-RSB-12 Installation/Configuration Download Page 1

Magnum Innovations

 

5675 Hudson Industrial Pkwy, Suite 3      -       Hudson, OH 44236      -       phone 330.915.2382      -      fax 330.529.5279      -      www.magnum-innovations.com      -      [email protected]

INSTALLATION & CONFIGURATION

TOP VIEW:

5.5625”

4.4375”

1”

2.75”

LEFT SIDE:

RIGHT SIDE:

MAGNUM SENSOR CONTROL BOARD

• 

PRODUCT CASING & DIMENSIONS

• 

TECHNICAL DATA

Part Numbers (Frequency Dependant)

M9-RSB-12 (902 MHz - North America)

M8-RSB-12 (868 MHz - Europe and China)

MJ-RSB-12 (928 MHz - Japan)

Input Power

24 VAC

Digital Relay Output Channels

(3) N.O. Dry Contracts Rated for 24 VAC 2A

Analog Output Channels

(1) 0-10 VDC Rated for 30mA

Digital Input Channels

(2) (24 VAC / 24 DC) (Source / Sink)

Pressure Measurement

(2) (3 Wire / Pressure Transducer) (Source / Sink)

Temperature Measurement

(9) (2 Wire NTC 10K)

Humidity Measurement

(1) (3 Wire / Humidity Sensor 0-100%) (Source / Sink)

Wireless Protocol

EnOcean Wireless Standard

Wireless Range

150ft (50ft-150ft typical)

Enclosure

ABS Plastic

Dimensions

5.5625”  x  2.75”  x  1”

Operating Temperature

-40°F  to 125°F  (-40°C  to  51.667°C)

Storage Temperature

32°F to 104°F (0°C to 32°C)

*PATENT PENDING

Summary of Contents for M9-RSB-12






Reviews: