Magnit RMS-1700, Instruction Manual

Page: 5 / 24

Notices
5
Noties
Plug the power plug in thoroughly to avoid
electric shock, as well as open circuit, short
circuit, smoking and flammation caused by over
heat of plug.
Use the socket with rated voltage of 110V 120V
separately from other electric appliances,
otherwise, fire may occur due to heat.
No watering: danger of short circuit and electric
shock.
Do not pull or plug the plug with wet hand in
respect of electric shock.
Do not use broken or loose socket in respect of
electric shock, short circuit and flammation.
Keep away from the steam hole to avoid burn.
Do not intend to refit, remove or repair the
product in respect of fire, electric shock or other
injuries.
Keep it away from the children or others unable
to operate.
Do not insert the metal needle into heat
dissipation hole or clearance in respect of injury
caused by electric shock.
Remove the dust on power plug at regular
intervals, otherwise, fire accident may occur
due to poor insulation.
Do not put the product in water or damp
environment or close to other heat sources, and
do not put the inner boiler on the naked fire.
Do not touch the hot part, especially the
surface of steam jet of ironing brush during or
after the operation.
Hold the plug rather than haul the power cord to
pull out the power plug.
Do use the attached power cord which shall not
be used for other equipment.
Do not operate on the unstable platform or
cushions which could not receive heat in respect
of injury or fire caused by fallen ironing brush.
If not in use, pull the power plug out of the socket
to avoid electric shock, creepage and fire arising
from damages and insulation ageing.
Wash the ironing brush after totally cooling
down to avoid scald.
Do not put it close to wall or furniture in case the
steam leads to color change or distortion of
which. Keep it over 30cm away from the wall
and furniture.