Magnimage MIG-F4, User Manual

Page: 5 / 30

2
Safety Instructions

Please use the correct power supply according that the power input
voltage for this product range is 100
～
240V AC, 50/60Hz.
 When you need connect or pull out any signal or bound guideline. Please
confirm that all the power supply cords have been pulled out ahead.

When you need to add hardware device for the video mosaic box, make
sure all of the signals and power cables have been pulled out ahead.
 Before you operate any hardware, please turn off the video mosaic box's
power, and to set you on the electrostatic by touching the ground
surfaces.

Please use the processor in clean, dry and ventilated environment, not
use it in the high temperature, humidity environment.

The product is electronic product; please stay away from the fire, water
and of which is inflammable and blast, dangerous.

This product is with high pressure components, please don't open the
case or maintain it by your own.

As there is exceptional condition with smoke, ill-smelling, please turn off
the switch at once and contact with the dealers.