13
Main program window
Function menu
after the software connected with the device successfully, the top right
indicator light in the software will be green, and will become red if not
successfully connected.
1.、Find the left bottom function setting menu in the MISC after connection
confirmed.
2、check device firmware version
3、the Upgrade menu can upgrade FPGA/MCU/HDMIRX of the device
4、factory reset
5.、Get data from machine, which is to get back the device data after software
reconnected with the device successfully.
6、Wifi Configure, can set WIFI IP,name and WIFI password
7、Input signal backup switch, the device can detect the signal automatically
and do hot backup after turning on.
Summary of Contents for MIG-F4
Page 11: ...8 Installing processing...
