15
How to use the buttons
The front panel buttons are divided into 5 areas: MENU, LAYER, INPUT,
FUNCTION and TAKE.
MENU area:
This area includes 2 buttons and 1 knob that can be pressed: OK,
and
knob. Short press “
knob
”, its function is the same as the confirmation button
(
OK
); Press the return button (
), the system will return to the previous
menu until it returns to the default state, or long press to return to the main
menu.
In the main menu, the confirmation button is also used to switch between the
browsing mode and the setting mode, for example:
In the browse mode, turn the knob counterclockwise to move the cursor to
the top or left; turn the knob clockwise to move the cursor down or to the
right.
Move the cursor to the item to be adjusted, press the knob or confirm button
to enter the setting mode. At this time, turn the knob counterclockwise to
decrease the current parameters value; turn the knob clockwise to increase
the current parameters value. To continue setting up other items on this page,
please switch back to browsing mode. To return to the previous menu, use
the back button; If the adjustment is complete, press the return button to
return to the previous menu until the default state, or wait for the system to
time out, automatically return to the default state. In some special interface,
Browsing mode
Setting mode
Layer 1 image
Layer 1 image
Brightness
50
Brightness
50
Contrast
50
Contrast
50
Saturation
50
Saturation
50
Press OK button or tape the knob to switch these two modes