78
Layer Configuration
Input Select
H Pos
0
Width
V Pos
0
Height
Input Input1
OFF
LOGO
1080
7680
Note:
1. On Backup mode, only layer1 and layer 2 can be used, and the layer
size/position is always the same.
2. Pay attention to the processor LCD panel prompt, the default layer1 is the
main display, layer2 is the backup, when TAKE is switched, layer2 is the main
display, layer1 is the backup, the main display layer is always at the top,
backup is at the bottom.
3. Automatic backup is disabled by default. When this function is enabled, if
W4000 detects that the input signal of the main display layer is lost, it will
automatically switch to backup.
4. Support backup switching between single input source or tile input.
5. Multi-machine TAKE and automatic backup function are mutually exclusive
items, can only be used one by two; After the multi-machine TAKE function is
turned on, press one of the TAKE keys, and multiple W4000s in the same LAN
can be switched synchronously.