67
The front panel introduction
Touch screen:
To prevent parameter confusion caused by
accidental touch, the outermost standby interface is unavailable
on. Entering any menu to continue use.
MENU area:
The knob is used to select individual menu options
and to enter menus, select or confirm an option. The "
OK
" button
is used to enter the menu and select an option. Below "
OK
" is the
return button, short press to return to the previous interface, long
press for 3 seconds to return to the standby interface.
LAYER area:
Layer 1/Layer 2/Layer 3/Layer 4: Corresponding to
the four layers of the device, short press to select the layer, long
press for about 3 seconds to open or close the layer.
FULL SCREEN:
Allows the currently selected layer to be full-screen
in one button in the corresponding output area.
QUICK LAYOUT:
No function defined yet.
INPUT area:
Input 1/Input 2/Input 3/Input 4 is equipped with four
groups of signal selection buttons. INPUT 5 and INPUT 6 are two
groups of expanded input selection. When these two groups of
Touch screen
Take boutton on switcher
mode
Knob/ok button/return
key
Selected input signal area
Common function shortcuts
layer selected and open