Magnimage LED-W4000 User Manual Download Page 5 | Manualshive

Page: 5 / 83

Magnimage LED-W4000 User Manual Download Page 5

1

Briefs

Thanks for your purchasing our LED video processor. Do hope you can enjoy
the  experience  of  the  product  performance.  The  design  of  the  LED  video
processor  conforms  to  international  and  industry  standards.  But  if  with
improper operation, there will be a personal injury and property damage.  In
order  to  avoid  the  danger,  please  obey  the  relevant  instructions  when  you
install and operate the product.

Trademark credit



VGA and XGA is a registered trademark of IBM.



VESA is a Video Electronics Standards Association's trademark.



HDMI, HDMI mark and High-Definition Multimedia Interface are all from
HDMI.



Even if not specified company or product trademarks, trademark has
been fully recognized VESA is a Video Electronics Standards Association's
trademark.

About the software

Do not change, decompile, disassemble, decrypt or reverse engineer the
software installed in the product, these acts are illegal.

«
...
3
4
5
6
7
...
»

Summary of Contents for LED-W4000




















































































Reviews:

No comments