Magnimage LED-780H, User Manual, Page: 29 / 65

28
Image crop setting sub menu
PIP1
PIP2
PIP3
Image Crop MAIN
OFF
（0,0）1920×1080
MAIN DVI2
Image Crop
Parameters
Reset Image Crop Settings
0
1920
H Start 0
V Start
Width
Height 1080
Image crop function is cropping the input signal, and output to LED screen
according to setting of windows. So the size and position of image crop
window is limited in the window of input signal. Setting parameter in above
chart are restricted.
Image crop
select“MAIN”、 “PIP1”、 “PIP2”、 “PIP3” cropping parameters；each signal
can be cropped in different picture at the same time.
Image crop
Parameters
restoration
Restore the MAIN,PIP1,PIP2,PIP3 cropping parameters
Horizontal Maximum is “width of input signal”
Vertical Maximum is “ height of input signal ”
H Position
Maximum can be set to the differentials between“the width of the
current output resolution”and“H Window”.
V start
Minimum 0，the biggest can be set to the differentials between“the
height of the current output resolution”and“V Window”