28
Fade In&Out Switch
Fade In&Out
Switch
“
VGA1
╳
<-
【
OK
】
-> DVI ” , as shown in the left example,
“【
OK
】”
the left side shows the name of the input port of channel
1, channel 2 on the right shows the input port name; sample The cursor
is on the left, the port name is VGA1, next to the“
╳
”that no valid signal
under VGA1 input port; use the“OK”,“FADE”,“LEFT”or“RIGHT”
key, between the two input ports Fade to switch; use the “ input
port selection key ” could switch the under layer port to the
appropriate port
（
Do not conflict with the top layer port, Please refer
to
Dual pictures input source conflict list
26]
）
Please note, if“
╳
”is shown beside the port name, there is no valid signal
under the port, the actual display was a black screen.
Fade Period
The process of fade in fade out can experience for 0 second to 5 seconds.
If set to 0 seconds, then switching process would be finished
instantaneously.
Multi
Connection
Multi machine combined setting, combination switching function setting
machine, check details in the
Multi-machine connection instruction
29]
Reset
Press“RIGHT”or“OK”to reset the parameter in the fade in fade out
function.