Magnimage LED-515D, User Manual

Page: 27 / 35

25
Form 2
：Dual pictures input source conflict list
Picture
1
Picture 2
AV1 AV2 VGA DVI HDMI DP
AV1

╳

*

*

*

*
AV2 ╳
 
*

*

*

*
VGA
     
DVI
     
HDMI
     
DP
     
Note 1: During the above graph with "*" combinations, because the picture 2
didn't go interlaced processing, there will be a slight shaking phenomenon in
the picture, in this kind of circumstance, can consider exchange picture 1 and
picture 2 input source.
Text Overlay
Text Overlay Text overlay function“open”and“closed”. The default is closed.
Blend Mode Divided into“mode 1”and“mode 2”two patterns.
Mode 1 ：in this mode the text pixels are on top and not blended. The non-text pixels
are blended with the other channel using the Transparent setting in Dual Pictures sub
Menu.
Mode 2 ：in this mode the text pixels are blended with the other channel using the
Transparent setting in Dual Pictures sub Menu. The non-text pixels are completely
transparent.
Above/Below
Above ：The pixel that has any color value above the Red, Green and Blue level
become tagged as TEXT PIXELS, the rest of the pixels become NON-TEXT pixels. The
judgment should be combined with the "And/Or" conditions.
Below ：The pixel that has any color value below the Red, Green and Blue level
become tagged as TEXT PIXELS, the rest of the pixels become NON-TEXT pixels. The
judgment should be combined with the "And/Or" conditions.
And/Or And ：all three color must be used to trigger the above / below comparison
Or ：any color is enough to trigger the above / below comparison
Red Red Threshold, Range: 0~255
Green Green Threshold, Range: 0~255
Blue Blue Threshold, Range: 0~255