OPERATOR’S MANUAL
with Maintenance Information
Operating Instructions
48
How to Fold Down the Guardrails
The platform railing system consists of three
fold down rail section for the extension deck
and three sections for the main deck. All
sections are held in place by four wire lock
pins.
1 Fully lower the platform and retract the
platform extension.
2 Remove the platform controls.
3 From inside the platform, remove the two
front extension deck wire lock pins.
4 Fold down the front rail assembly. Keep
hands clear of pinch points.
5 Replace the two removed pins back into
each side rail bracket.
6 Fold down the extension platform left rail
assembly. Keep hands clear of pinch
points.
7 Fold down the extension platform right rail
assembly. Keep hands clear of pinch
points.
8 Carefully open the gate and move to the
rear step or the ground.
9 From the rear step or from the ground,
remove the left rear main deck wire lock
pins.
10 Fold down the left rail assembly. Keep
hands clear of pinch points.
11 Replace the removed pin back into rear rail
bracket.
12 Remove the right rear main deck wire lock
pins.
13 Fold down the right rail assembly. Keep
hands clear of pinch points.
14 Replace the removed pin back into rear rail
bracket.
15 Fold down the rear rail assembly. Keep
hands free of pinch points.
How to Raise the Guardrails
Follow the fold down instructions but in reverse
order.
To Extend and Retract Platform
1 Press the platform lock pin pedal on the
extension deck by foot.
2 Push the platform extension guardrail to
extend the platform to the desired position.
Do not stand on the platform extension
while trying to extend it.
