PAGE
DATE
PAGE REV
24 July 2019
B
209-00-24C
M24C PLUS FLIGHT MANUAL
61
5.6.4 ROTOR HEAD - RIGHT HAND SIDE
NOTE:
A ladder is necessary for the pre-flight checks that follow.
1. Nuts of the rotor head....................................Tight
All safety visible locking systems are installed
and functional
2. Rotor head and hub bar assemblies .............No cracks, wear, corrosion or rubbing
and not damaged
3. Ring gear .......................................................Condition
Ring gear teeth are not damaged
4. Flexible shaft and Bendix pre-rotation gear...Sufficiently coated with grease
5.6.5 REAR SECTION
A. RADIATORS
1. Radiator surfaces ..........................................Free of fluid leaks or chafing and not damaged
2. Clamps and fixing points ...............................Tight
3. Fan and its support........................................Fixed and free to spin
B. PROPELLER
3. Whole surface of each blade.........................Not damaged or detached
Clean
4. Hub and bolts of the propeller support
flange .............................................................Tight
5. Spinner ..........................................................Condition
Tight
C. PREROTATION SYSTEM
6. Pre-rotation assembly....................................Correct position
7. Belts...............................................................Correct tension
Condition and wear
8. Pre-rotation system .......................................Function
9. Belt tension pulley lever.................................Free movement
10. Pulley brake shoe ........................................Correct position