manualshive.com logo in svg

Magnetic Autocontrol MPT-333, Operating Instructions Manual

The Magnetic MPT-333 is a versatile and efficient tool designed to enhance your work experience. Featuring a powerful magnetic base, this product offers stability and precision. For detailed instructions on how to maximize its potential, download the free manual from manualshive.com. Ready to elevate your work efficiency?

Share
Download
background image

66

MPT-333

Electrical connection

8.3.1 

Opening and closing the cover

Opening the cover

1.  Loosen the screw of the cover.
2.  Dismount the protective earth conductor at the cover.
3.  Pull off the cover to the front and remove it.

Closing the cover

 DANGER

Danger to life if the protective earth conductor for the cover is not con-

nected! 

1.  Ensure that the protective earth conductor of the cover is connected to 

the service door.

2.  Put the cover onto the support beam from the front.
3.  Secure the cover with the hexagon socket screws.

8.3.2 

Opening and closing the service door

Opening the service door

1.  Open the service door with the supplied key.

Closing the service door

 DANGER

Danger to life if the protective earth conductor for the service door is not 

connected! 

1.  Ensure that the protective earth conductor of the service door is connect-

ed to the service door.

2.  Close the service door.

Summary of Contents for MPT-333





























































































Reviews:

No comments

Related manuals for MPT-333

Brands by name

Popular brands

Load more brands