Swing Door
MPS-122
Mechanical settings and final installation
41
7.2 Mounting
locking
element
Danger of crushing
CAUTION
Danger of crushing!
While the swing door is supplied with voltage,
control commands can move the locking element. If
these movements are made unexpectedly, they
may cause crushing.
– If possible, disconnect the swing door from the
voltage.
– Consider possible movements of the locking
element for all work.
7.2.1 Mounting
brackets
Mag00625
1
3
2
4
Fig. 18: Mounting brackets
1 Bracket
2 Outer
tube
3 Holder
4
Threaded pin M8 (2)
CAUTION!
Danger of crushing!
1. Disconnect swing door from power supply. Ensure that the
system is powered down. Secure against reactivation.
2. Turn the threaded pins M8 out of the holders.
3. Push the brackets into the holders at the outer tube.
4. Fasten the brackets in the holders with the threaded pins.
