Pedestrian Pivot Barrier
MPP-112 / MPP-122 / MPP-132 / MPP-212 / MPP-222
Malfunctions
5817,0016EN / Version 00
75
Error code
Description
Possible cause and corrective action
E61
CANopen bus error
Check the CAN cable wiring and the DIP switch settings (bus
termination). If necessary, replace the patch cable (standard
CAT5).
E62
Wrong MMC address
Set the MMC-120 DIP switches for the CAN bus address as
follows: 1: ON, 2: OFF, 3: OFF, 4: OFF.
E64
Connection to MMC
lost
Check the patch cable. If necessary, exchanges patch cable.
E65
EEPROM I²C error
Internal EEPROM communication error, contact service.
E66
EEPROM checksum
error
A communications error to the internal EEPROM appeared.
When the error appears several times, contact service.
All those status and error codes that are with automatic reset function will be displayed during a period of max. 10
minutes after the error is rectified but however, as long as the failure is existing.
All other errors will cause pedestrian pivot barriers to be set out of operation. The error code will be displayed
permanently until new start of the controller after rectification of the fault.
Table 12: Error codes of the MBC-110
