Magnetic Autocontrol MHTM MicroDrive, Operating Instructions Manual

Page: 69 / 196

Barrier MHTM
TM
MicroDrive
Assembly and installation
5815,5001US / Version 02.66 69
8.8 Assemble safety light barrier
Only MAGNETIC safety light barriers must be used.
8.8.1 Assemble transmitter
A B
B
Mag00224
A
4
3
1
2
1
C
6.30
(160)
0.67
(17)
1
1.02
(280)
1
1.50
(292)
Ø 0.51
(Ø 13)
Ø 24
(Ø 6)
Ø 0.24
(Ø 6)
0.59 (15)
1.18 (30)
3.94 (100)
17.32
(440)
~
6.30
(160)
1.18 (30)
0.67
(17)
Ø 0.51
(Ø 13)
1
1.02
(280)
1
1.50
(292)
0.59 (15)
2.76 (70)
Ø 24
(Ø 6)
Ø 0.24
(Ø 6)
Fig. 23: Assemble the receiver's light barrier housing on the barrier
housing
Dimensions in inch or feet are without parenthesis. Dimensions in
mm are in parenthesis.
A View A
B View B
C Light barrier housing transmitter
1
Hexagon socket screws 5 AF
2 Transmitter
3
Transmitter connection line
4 Cable screw connection
1. Drill holes for the light barrier housing according to Fig. 14.
2. Mount the cable screws at the housing with locknuts.
3. Connect connection line for transmitter to the control unit.
4. Guide connection line through cable screws.
5. Mount light barrier housing to housing with the hexagon
socket screws 5 AF.