12.1
Vacuum pump oil change (code 007935090600)
Vacuum pump oil must be changed frequently to assure the best performance of the pump.
When it is time to change the vacuum pump oil, the display will show
Al. Oil
message.
When changing the oil, follow the instructions below:
it is forbidden to interfere with the components of the stations which are not specifically
referred to in this section.
Required tools:
1 Phillips screwdriver
2 socket wrenches (12 mm)
1) Disconnect the station from the power mains.
2) Unscrew 4 screws fixing the bottom panel to the station body and remove the panel.
3) Put a tray under the plug (
63)
, open the plug and drain all oil from the vacuum pump.
4) After emptying the pump, insert the plug
(63)
and open the upper plug
(61).
5) Fill the pump with oil, pouring it through the upper opening
(61)
until the middle position is
reached in the sight-glass
(62).
6) After filling the pump, close the upper plug
(61).
62
Sight-glass
Warning!
Fire risk.
Do not open!
Electric shock
hazard.
61
Upper plug
63
Plug