> Alfa Romeo <
Use
UP-DOWN
buttons to select the brand or go to user vehicles.
Confirm by pressing
ENTER
.
After selecting the brand you need to repeat all successive operations to confirm system
filling parameters.
Refrigerant qty g: XXXXX
Vacuum: XX:XX
Vacuum generation time is calculated based on the refrigerant quantity specified.
Use
UP-DOWN
buttons to select the oil/UV injection program.
See
9.5 Programming oil/UV injection phase.
Confirm by pressing
ENTER
to start the automatic program with manual oil/UV injection.
>User vehicles<
Alfa Romeo
Use
UP-DOWN
buttons to select the user’s vehicle.
Confirm by pressing
ENTER
.
See
9.2.1 User vehicles
.
8.4
User program
When entering the program selection mode (see
9 PROGRAMS
) the following menu
appears:
Auto Progr. ■
User progr. □
Select using
UP-DOWN
buttons. Confirm by pressing
ENTER
.
Recycle? Yes
No
Select using
UP-DOWN
buttons. Confirm by pressing
ENTER
.
If
NO
option is selected, the station will suggest going into
vacuum phase
.
If
YES
option is selected, the following message is displayed:
Control of min.
pressure growth
A 1-minute pressure growth test will be proposed before concluding the refrigerant recovery
phase.
Use
UP-DOWN
buttons to select the desired value. Confirm by pressing
ENTER
.
Vacuum? Yes
No
Select using
UP-DOWN
buttons. Confirm by pressing
ENTER
.
If
NO
option is selected, the station will suggest going into
filling phase
.
If
YES
option is selected, the following message is displayed: