Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 5 of 44
1
INTRODUCTION
Thank you for your purchase of Magnetek’s MLTX2 Radio Remote Control.
These instructions are to be used as a reference for personnel operating the MLTX2 Radio Remote Control and the
equipment that this MLTX2 Radio Remote Control is attached to.
The user of these instructions should have basic knowledge in the handling of electronic equipment.
1.1
PRODUCT MANUAL SAFETY INFORMATION
Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and adjustable
frequency drives, and industrial braking systems for overhead material handling applications. This manual has been
prepared by Magnetek to provide information and recommendations for the installation, use, operation and service
of Magnetek’s material handling products and systems (Magnetek Products). Anyone who uses, operates,
maintains, services, installs or owns Magnetek Products should know, understand and follow the instructions and
safety recommendations in this manual for Magnetek Products.
The recommendations in this manual do not take precedence over any of the following requirements relating to
cranes, hoists and lifting devices:
•
Instructions, manuals, and safety warnings of the manufacturers of the equipment where the radio system
is used,
•
Plant safety rules and procedures of the employers and the owners of facilities where the Magnetek
Products are being used,
•
Regulations issued by the Occupational Health and Safety Administration (OSHA),
•
Applicable local, state or federal codes, ordinances, standards and requirements, or
•
Safety standards and practices for the overhead material handling industry.
This manual does not include or address the specific instructions and safety warnings of these manufacturers or any
of the other requirements listed above. It is the responsibility of the owners, users and operators of the Magnetek
Products to know, understand and follow all of these requirements. It is the responsibility of the owner of the
Magnetek Products to make its employees aware of all of the above listed requirements and to make certain that all
operators are properly trained.
No one should use Magnetek Products prior to becoming familiar with and
being trained in these requirements.
WARRANTY INFORMATION
FOR INFORMATION ON MAGNETEK’S PRODUCT WARRANTIES BY PRODUCT TYPE, PLEASE VISIT
WWW.MAGNETEK.COM.
