Magnescale SR87, Installation Manual

Page: 21 / 44

(E)
9
SR87, CH33
CH33
CH33 (cable with unterminated end) Signal Specifi cations
Cable color
SR87
Securing the connector
Firmly tighten the set screw of the
connector at 0.3
6 N·m.
Full duplex Half duplex
Brown 0 V 0 V
Black 0 V 0 V
Green +5 V +5 V
Violet +5 V +5 V
Blue CNT
(Note 1)
CNT
(Note 1)
Yellow N.C. (Note 2) N.C. (Note 2)
Orange SD N.C. (Note 2)
Gray –SD N.C. (Note 2)
Red RQ SD/RQ
White –RQ –SD/–RQ
(Note 1) The CNT terminal is for service maintenance. Do not connect.
(Note 2) N.C.: Signal is not connected.
Th ere are always two cables each for +5 V and 0 V, and so be sure to connect these cables in pairs. If only
one cable is connected, the scale may not operate due to the voltage drop in the cable.