5
3.
Setting
3.1.
Download of setting application and GSDML file
1.
Access to Magnescale Web
(https://www.magnescale.com/mgs/language/english/）
「Products」
→「Digital Gauge」
→「MG80-NE/EI/PN MG80-CM」
→「Software」
Download the Setting application from “Setting application for Windows PC”
As above
「Products」
→「Digital Gauge」
→「MG80-NE/EI/PN MG80-CM」
→「Software」
Download the GSDML file from “Setting file”
GSDML file can be used regardless of the PLC manufacture and the number
of axes used.
2.
Save the file in an appropriate location and extract it with decompression
software.
3.2.
About IO data
When the GSDML file is imported into the development environment, the IO data
is handled as Byte array data. Please refer to “6. Communication” page of the
text for IO data mapping.
3.3.
Setting various parameters
Various settings of MG80-PN can be performed from PC by using
“Setting application for Windows PC”
