20
5.3.2.
Pause
This function holds the current value of the specified frame and the comparator
output and peak value for the current value.
The transition of the peak value in the pause On / Off state is as shown below.
現在値
最小値
最大値
ポーズ
ON
ポーズ
OFF
Operation example of Pause
5.3.3.
Start
Starts measuring the peak value of the specified frame.
(Set the current value for the maximum and minimum values, and set zero
for the peak to peak value)
5.3.4.
Reset
Set the measurement value of the specified frame to zero.
5.3.5.
Preset
Preset the set value.
5.3.6.
Master preset
By using the reference point of the measuring unit, the position can be reproduced
as an absolute value when the power is restarted.
The procedure for master preset is as follows.
1.
Turn on the master preset function in advance.
2.
Turn on the power and pass through the reference point of the measuring unit.
3.
Align the measuring unit with the master work to be measured
4.
Set the master value using the master value setting command.
Once this value is set, the reference point will be set automatically after the
power is next turned on when move the spindle of the measuring unit and pass
through the reference point.
Max
Min
Current
Pause ON
Pause OFF
