Magnescale LY71, Simplified Manual

Page: 40 / 146

6
(E)
LY71
Welder
Coolant
Machine oil
Switchboard
(Locate more than 0.5 m away.)
Chips
Be careful where you install
the counter unit.
Install the counter unit so it is
protected from coolant, machine
oil, chips and the like.
→
↓
Motor
3. Installation and Connection
3-1. Installation
Environmental conditions
•
Ambient temperature: 0 - 40 °C
• For indoor use (avoid exposure to direct sunlight)
• Install the counter unit so it is protected from coolant, machine oil, chips and the like
•
Install the counter unit at least 50 cm from power switchboards, welders, motors and the like
• Do not completely cover the counter unit with a vinyl cover or put it in a sealed case.
•
If the counter unit’s power is momentarily cut off, or if the voltage temporarily falls below the usable
range, the alarm may sound and faulty operation may occur. If such a situation occurs, unplug the AC
adaptor, wait a few seconds, reinsert the AC adaptor and repeat the operations from the beginning.
Panel cut-out diagram
↓
↓
4-R3 or less
262 ±0.2
246.6
+1
0
11
3
.3
+1
0
4-
φ
5.5
(30)
23.3
60 ±
0.2
Mounting the counter unit from the panel front. Unit: mm
Note