Magnescale LY71, Simplified Manual

Page: 37 / 146

LY71
(E)
3
2. Name and Function of Each Part
1 3 6 7 " # $ % &
(
,
/
!9 8 5 4 ) . - + ~
2
2-1-2. When used with the comparator
No. Name Function
1
Judgment display Comparator judgment display (When NG, the NG lamp at the top
also lights on.)
2
ABS lamp Lights on : When displaying absolute value (ABS)
Flashes : When selecting the axis
Lights off : When displaying incremental value (INC)
3
Counter display A : Measurement value display (current value, peak value)
4
Comparator setting B : Comparator setting value display Upper
value display C : Comparator setting value display Lower
5
Upper and Lower lamps Upper : Lights on when displaying maximum upper limit value,
flashes when editing
Lower : Lights on when displaying minimum lower limit value,
flashes when editing
6
RESET key Resets incremental value to zero
Switches to INC mode when pressed during ABS display.
7
Axis Select key Used to perform operations for counter display A
8
Upper Limit Value Input key Used to edit the displayed numerical value
9
CP No. key Used to change the comparator set number
(Comparator Number
Switching key)
!
Lower Limit Value Input key Used to edit the displayed numerical value
"
P key Used to perform numerical value setting operations (preset)
(lamp lights on when selected)
#
key Used to set the datum point (lamp lights on when selected)
(Datum Point Value/ Used to set the master calibration value when using the master
Master Calibration Value calibration function
Setting key)
$
REF key Used to detect the measuring unit reference point (lamp lights on
when selected)
Used to relocate the master calibration value when using the
master calibration function
%
ABS/INC key Switches between ABS mode and INC mode
&
SETUP key Used to start to make various settings
(
HOLD key Used when using the hold function (latch/pause)
(lamp lights on when hold function is selected)
)
CP . key Switches the comparator setting values (Used when there is a
higher comparator setting)
~
± key Comparator setting value offset input