MagneMotion MagneMover LITE, User Manual, Page: 338 / 382

Maintenance
Repair
54 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Single Array Vehicles
Figure 7-23: Single Array Precision Rail Vehicle Assembly
Required Tools and Equipment
• Hex wrench, 2.5 mm.
• Loctite 243, Thread locker Anaerobic Adhesive, Blue.
Procedure
1. Stop all motion on the Path where the vehicle to be removed is located.
2. Remove the vehicle as described in Replace Precision Rail Vehicles on page 7-45 .
3. Place the vehicle on a non-metallic work surface with the magnet array down. Keep
the magnet array at least three feet away from metal objects and tools. For safety rea-
sons, only remove and replace one magnet array at a time.
4. Remove the two M4 x 12 mm screws securing the magnet array to the vehicle and
store them in a safe location for reuse.
5. Grasping the array firmly with one hand while holding the vehicle firmly with the
other hand, lift the vehicle off of the array and place the array in the original shipping
container, or in an isolated container.
6. Remove the shims from the top of the magnet array and store them in a safe location
for reuse.
Single Array
Carriage
Shim, 1mm
(2X)
Magnet Array
M4 x 12mm Screw
(2X)