Specifications and Site Requirements
Mechanical Specifications
MagneMover LITE User Manual
3
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Mechanical Specifications
All drawings within this manual are generic and may not reflect specific configurations of the
MagneMover LITE components. To obtain a complete and current set of drawings and docu-
ments contact MagneMotion Technical Support.
1000 Millimeter Motor
Figure 4-1: 1000 Millimeter Motor Mechanical Drawing (G4)
NOTE:
Aluminum rails shown. Dimensions are the same for stainless steel rail version.
The Sync cable connection is only present if the Synchronization option is installed.
The exclusion zones shown are for the MM LITE motor only. Additional exclusion
zones may be required based on the material being transported by the motor.
Refer to
for the electrical specifications.
Exposed Materials
•
316/316L Stainless Steel.
•
304L Stainless Steel with Electroless Nickel plating (SS rails).
•
6061-T6 Aluminum (Al rails).
•
6063-T5 Aluminum (Al rails).
•
EPDM (synthetic rubber).
•
Dow Corning
®
Silicone 737 and 734.
All Dimensions in Millimeters [Inches]
Weight: 7.3 kg [16 lb]
3.75
95.3
98.1±0.75
3.86±.03
2.36
60.0
14.2
0.56
66.1±0.75
2.60±.03
4X
1.18
30
4X
2.95
75
39.35
999.5
4X CLEARANCE NEEDED FOR
CONNECTOR & WIRE BEND RADIUS
999.0
39.33
0
223.00
8.780
27.638 702.0
0
28.465 723.0
0
7.953 202.0
0
19.685 500.00
COMMUNICATION CABLE
CONNECTOR
POWER CONNECTOR
(SYNC MOTOR ONLY)
SYNC CABLE CONNECTOR
CONNECTOR
COMMUNICATION CABLE
2X M6X1.0 7mm
MOUNTING HOLE
MAX ALLOWABLE TORQUE = 5.5 Nm
1.69
43.0
3.39
86.0